Basf 2018-10-12T13:55:37+00:00

Project Description

POM Ultraform

List of main grades, for the complete range click here

GradeMFICharacteristics
Ultraform H2320 006 / 006 AT2,9High-molecular-weight with increased flowability for injection moulding of relatively thick-walled moldings
Ultraform N2320 003 / 003 AT7,5Rapidly solidifying standard grade for injection moulding
Ultraform S2320 003 /003 AT11Easy flowing grade for injection moulding difficult, thin-walled parts
Ultraform W2320 003 / 003 AT25Very free-flowing grade, suitable where processing is extremely difficult
Ultraform N2640 Z4 / Z4 AT5,5POM+PUR, elastomer modified injection moulding grade with high impact strenght

MFI Melt flow rate: standard ISO 1133   190°C/2,16 kg – Unit cm3/10min
All the above data have purely indicative value

PA6 Ultramid B

List of main grades, for the complete range click here

GradeColorsCharacteristics
Ultramid B3Suncolored, black 00464Easy flowing injection moulding grade – unreinforced
Ultramid B3Luncolored, black 00464Impact-modified, easy flowing injection moulding grade
Ultramid B3E G3uncolored, black 00564Good dielectric properties – 15% glass fibre reinforced
Ultramid B3E G5uncoloredGood dielectric properties – 25% glass fibre reinforced
Ultramid B3E G6uncolored, black 00564Good dielectric properties – 30% glass fibre reinforced
Ultramid B3E G7uncolored, black 00564Good dielectric properties – 35% glass fibre reinforced
Ultramid B3W G5uncolored, black 00564Very high heat-aging resistance, easy flowing – 25% glass fibre reinforced
Ultramid B3W G6uncolored, black 00564Very high heat-aging resistance, easy flowing – 30% glass fibre reinforced
Ultramid B3W G7uncolored, black 00564Very high heat-aging resistance, easy flowing – 35% glass fibre reinforced

All the above data have purely indicative value

PA66 Ultramid A

List of main grades, for the complete range click here

GradeColors and versionsCharacteristics
Ultramid A3Kuncolored, black 00464, FC AQUA uncoloredEasy flowing injection moulding grade – unreinforced
Ultramid A3Wuncolored, black 00464Easy flowing, heat aging resistant injection moulding grade – unreinforced
Ultramid A3Zuncolored, black 30464Impact-modified ans stabilized injection moulding grade with good low temperature impact resistance
Ultramid A3E G5uncoloredGood dielectric properties – 25% glass fibre reinforced
Ultramid A3E G6uncolored, black 00564, FC uncoloredGood dielectric properties – 30% glass fibre reinforced
Ultramid A3E G7uncolored, black 00564, FC AQUA uncolored, FC AQUA black 23285Good dielectric properties – 35% glass fibre reinforced
Ultramid A3E G10uncolored, FC AQUA black 23285Good dielectric properties – 50% glass fibre reinforced
Ultramid A3H G5uncolored, black 00564High heat-aging resistance even in contact with lubricants combined with good dielectric properties – 25% glass fibre reinforced
Ultramid A3W G3black 00564Very high heat-aging resistance and easy flow –  15% glass fibre reinforced
Ultramid A3W G5uncolored, black 00564, black 20560Very high heat-aging resistance and easy flow –  25% glass fibre reinforced
Ultramid A3W G6uncolored, black 00564, black 20560Very high heat-aging resistance and easy flow –  30% glass fibre reinforced
Ultramid A3W G7uncolored, black 00564, black 20560Very high heat-aging resistance and easy flow –  35% glass fibre reinforced
Ultramid A3W G10uncolored, black 00564Very high heat-aging resistance and easy flow –  50% glass fibre reinforced
Ultramid A3X2 G5uncolored, black 23187Flame retardant (V0) – 25% glass fibre reinforced
Ultramid A3X2 G7uncolored, black 23187Flame retardant (V0) – 35% glass fibre reinforced

FC: approved for Food Contact applications
FC AQUA: approved for Food Contact and/or drinkable water contact
All the above data have purely indicative value

PBT Ultradur

List of main grades, for the complete range click here

GradeVisc.M.E.CharpyCharacteristics
Ultradur B 450013025005,2Medium viscosity grade for the production of thin walled profiles and pipes. Suitable also for injection moulding
Ultradur B 4500 FC13025005,2Approved for Food Contact applications
Ultradur B 452013025005Medium viscosity, injection moulding grade for technical parts
Ultradur B 4300 G211544003,5Easy flowing injection moulding grade with 10% glass fibers
Ultradur B 4300 G410770006,5Easy flowing injection moulding grade with 20% glass fibers
Ultradur B 4300 G610598009Easy flowing injection moulding grade with 30% glass fibers
Ultradur B 4300 G6 FC AQUA10298009,530% glass fibers – approved for drinking water contact and/or direct food contact
Ultradur B 4406 G6108113001030% glass fibers – with flame-retardant properties (V0), halogenated
Ultradur S 4090 G610597007PBT+ASA, good chemical and ESCR resistance, with 30% glass fibers

VISC: Viscosity Number – standard ISO 307, 1157, 1628 – Unit cm3/10min
M.E. Tensile Modulus: standard ISO 527-1/-2 – Unit MPa
CHARPY: notched impact strenght 23°C – standard ISO 179/1eA – Unit kJ/m2
All the above data have purely indicative value

PSU Ultrason

List of main grades, for the complete range click here

GradeMFIDensityCharacteristics
Ultrason E 2010701370Standard injection-moulding grade of medium viscosity
Ultrason S 2010901234Injection-moulding grade of low visosity and good flowability
Ultrason S 3010401234Medium viscosity injection-moulding and extrusion grade with improved toughness and chemical resistance
Ultrason S 2010 G4451380Low viscosity injection-moulding grade of high modulus and strenght, reinforced with 20% glass fiber

MFI Melt flow rate: standard ISO 1133 – 360°C/2,16 kg – Unit cm3/10min
Density: standard ISO 1183 – Unit Kg/m3
All the above data have purely indicative value