ENGINEERING POLYMERS
Engineering Polymers are widely used products with superior physical and mechanical properties: rigidity, toughness, flexibility, resistance to high temperatures, static and dynamic loads and ageing. Their performance is so remarkable that they are used to replace metal. The main fields of application range from the medical sector to food, from industrial applications to automotive, from household appliances to electrical/electronic goods.
PP Compound
LyondellBasell Polypropylene Compounds are characterised by excellent physical and mechanical properties. They are widely used in the household appliance, hydrothermal sanitation, consumer goods, industrial and automotive sectors
Our product portfolio consists of the following materials:
POM
Ultraform is the trade name for the copolymer acetal resin (POM) manufactured by BASF. It is a semi-crystalline material with excellent mechanical properties, chemical resistance, resistance to wear and tear, and low water absorption. It can be used for the production of technical articles such as gears, springs, screws, handles, zips, clamps, fuel pumps, inhalers, runners for use in furniture, etc.
Applications:
- Automotive
- Household goods
- Plumbing sector
- Toys
- Industrial components
- Medical
Processing technologies:
- Extrusion of semi-finished products
- Injection moulding
- Blow moulding
Download Ultraform AT product range brochure
Download Ultramid, Ultradur, Ultraform – Resistance to chemicals brochure
PA 6
BASF’s Ultramid products are moulding compounds on a Nylon 66 (Ultramid A), Nylon 6 (Ultramid B) base.
These materials are characterised by excellent mechanical properties, thermal stability, good resistance to low temperatures, abrasion and high chemical resistance.
They are widely used in the automotive, electrical/electronic, sports and household goods sectors.
They are available in reinforced ( fibreglass and mineral filler) and non-reinforced versions and with flame retardant additives.
Applications:
- Automotive
- Electrical & Electronic
- Industrial components
- Furniture
- Household goods
- Sport
Processing technologies:
- Injection moulding
Download Ultramid product range brochure
Download Ultramid, Ultradur, Ultraform – Resistance to chemicals brochure
PA 6/6
BASF’s Ultramid products are moulding compounds on a Nylon 66 (Ultramid A), Nylon 6 (Ultramid B) base.
These materials are characterised by excellent mechanical properties, thermal stability, good resistance to low temperatures, abrasion and high chemical resistance.
They are widely used in the automotive, electrical/electronic, sports and household goods sectors.
They are available in reinforced ( fibreglass and mineral filler) and non-reinforced versions and with flame retardant additives.
Applications:
- Automotive
- Electrical & Electronic
- Industrial components
- Furniture
- Household goods
- Sport
Processing technologies:
- Injection moulding
Download Ultramid product range brochure
Download Ultramid, Ultradur, Ultraform – Resistance to chemicals brochure
PBT
Ultradur is the trade name for BASF’s polyester-based products.
The polybutylene terephthalate is widely used for technical applications in a various industries.
Main features are high stiffness and strength, outstanding dimensional stability, low water absorption, and excellent chemical and ageing resistance.
Applications:
- Automotive
- Electrical & Electronic
- Industrial components
- Toys
- Packaging
- Constructions
Processing technologies:
- Injection moulding
- Extrusion of semi-finished products
- Sheet and pipe extrusion
- Cast film extrusion
Download Ultradur product range brochure
Download Ultramid, Ultradur, Ultraform – Resistance to chemicals brochure
Polysulfone
Ultrason resins are amorphous thermoplastics derived from polyethersulfone (PESU), polysulfone (PSU) and polyphenylene sulfone (PPSU).
Main features are good mechanical properties, superior temperature resistance, excellent chemical resistance and are also available in versions reinforced with fibreglass.
They can be used in applications where other technopolymers are unable to achieve the desired performance.
Applications:
- Automotive
- Electrical & Electronic
- Industrial components
- Plumbing sector
- Household goods
- Safety
Processing technologies:
- Injection moulding
- Pipe, profile and sheet extrusion
- Extrusion – Blow Moulding
ABS
ABS (acrylonitrile-butadiene-styrene) is an amorphous polymer obtained by the emulsion or mass polymerisation of acrylonitrile and styrene in the presence of polybutadiene.
The styrene monomer provides good processability to ABS, acrylonitrile lends rigidity and thermal and chemical resistance, while butadiene makes the product tougher and more resilient, even at low temperatures. By changing the proportions of the ABS components and adding specific additives, different grades with particular properties can be produced.
Main features are high level of toughness and i mpact resistance and is used in sectors such as cars, household appliances, toys, furniture and household goods
Applications:
- Automotive
- Electrical appliances
- Furniture
- Plumbing sector
- Toys
- Medical
Processing technologies:
- Injection moulding
- Sheet and profile extrusion
Download Styrenics – Technical Information brochure
SAN
SAN is an amorphous copolymer of styrene with between 20 and 30% acrylonitrile. This material is used mainly in applications where additional chemical resistance and slightly higher temperature resistance than crystal polystyrene is required. SAN is a transparent material with a natural Yellowish and bluish shade, glass clear and other various transparent colours. SAN is and is widely used in cosmetics, household appliances, furniture, household goods and office equipment.
Applications:
- Automotive
- Electrical appliances
- Cosmetics
- Plumbing sector
- Consumer goods
- Household goods
Processing technologies:
- Injection moulding
- Sheet and profile extrusion
- Masterbatch and compounding
Download Styrenics – Technical Information brochure
MABS
This is a transparent material, attractive, with good shock resistance and easy processing, made of ABS and methyl methacrylate. It is used in cosmetics, toys, household appliances and medical applications.
It can be used as an alternative to MBS, when better chemical resistance to heat is required.
Applications:
- Electrical appliances
- Cosmetics
- Medical
Processing technologies:
- Injection moulding
- Extrusion
SBC
Styrene-butadiene copolymers are materials consisting of alternating blocks of polystyrene and polybutadiene obtained by anionic polymerisation. The ratio between the two phases determines the properties of the material, the styrene component determines transparency and rigidity while the butadiene part improves toughness and Impact resistance. They are used in packaging, medical sector and stationery.
Applications:
- Packaging
- Consumer goods
- Medical
- Toys
Processing technologies:
- Injection moulding
- Cast film extrusion (BOPS)
- Extrusion-Blow Moulding
ASA
ASA is an acrylonitrile-styrene-acrylate copolymer with excellent chemical, UV and heat resistance, making it suitable for outdoor applications in the construction, automotive and electronics industries.
Applications:
- Automotive
- Electrical & Electronic
- Electrical appliances
- Constructions
Processing technologies:
- Injection moulding
- Profile and sheet extrusion
PC/ASA
It is a blend of Polycarbonate and Acrylonitrile-Styrene-Acrylate copolymer, characterised by superior aesthetics, excellent impact resistance, heat resistance and resistance to ageing, making it the ideal choice for automotive applications, both interior and exterior.
Applications:
- Automotive
- Electrical & Electronic
- Constructions
Processing technologies:
- Injection moulding
SMMA
A copolymer of styrene and methyl methacrylate, SMMA is particularly suitable for applications requiring a high level of rigidity, transparency and scratch resistance. It is characterised by good thermal stability and moderate chemical resistance. It can be used as an alternative to SAN or PC in cosmetics, food and household appliances.
Applications:
- Electrical appliances
- Cosmetics
- Toys
- Household goods
- Medical
Processing technologies:
- Injection moulding
MBS
MBS is a copolymer of methyl methacrylate, butadiene and styrene, characterised by superior impact resistance, excellent transparency and easy processing. It is used in toys, household appliances, the medical sector and packaging.
Applications:
- Electrical appliances
- Cosmetics
- Consumer goods
- Household goods
- Medical
Processing technologies:
- Injection moulding
PA/ABS
Polyamide/ABS blend characterised by excellent chemical and impact resistance, excellent dimensional stability, acoustic damping, matt finish and easy processing. These properties make it suitable for use in both the automotive and household appliances sectors.
Applications:
- Automotive
- Electrical appliances
- Safety
Processing technologies:
- Injection moulding
- Extrusion
PA/ASA
Polyamide/ASA blend characterised by excellent chemical and impact resistance, excellent dimensional stability, acoustic damping, matt finish and easy processing. These properties make it suitable for use in both the automotive and household appliance sectors.
Applications:
- Automotive
- Electrical appliances
- Safety
Processing technologies:
- Injection moulding
- Extrusion
PC
Polycarbonate is an amorphous polymer characterised by a unique combination of toughness, optical transparency, rigidity, mechanical strength and excellent electrical properties.
It also offers good UV stability, which can be further improved by adding stabilisers.
Applications:
- Automotive
- Electrical appliances
- Lighting
- Constructions
- Medical
Processing technologies:
- Injection moulding
- Sheet extrusion
